IP-COM

Showing all 14 results

Show:

IP COM 5GHz 23dBi ipMax AC Gigabit Outdoor CPE | ILBE-5AC

Highlights:
iLitebeam 5AC Long Range Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access. Adopts of 11ac wireless technology and gigabit ethernet Port design, the maximum throughput for ptp connection could be up to 450Mbps. It features with 23dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable long range range connection.

25km+ transmission Range

iLitebeam 5AC adopts of independent external power amplifier and 23dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 25km.

P2P Connection Throughput up to 450+Mbps

iLitebeam 5AC adopt of 11AC wave2 technology, it delivers 867Mbps speed rate at 5GHz radio. Come with Gigabit ethernet LAN port design , the maximum throughput test for PtP connection can be up to 450Mbps.

ipMAX–IP-COM TDMA proprietary protocol

ipMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless P2MP outdoor application scenarios.
In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can’t sense each other, they become “hidden nodes” and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput.
With ipMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.”

iLink–Auto-bridge Technology Enable it To Easy Setup

iLink is IP-COM proprietary auto-bridge technology, It enables the CPE or basestation in factory default settings connect to each other automaticaly after the device is powered on. It is very useful for the person who is not familiar with network knowledge, especilly for for CCTV surveillance transmission application.

Multiple Application Scenarios

Long-Distance Wireless Connection
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.
WISP(Client+Router) Mode
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.

Professional Outdoor Design

Equipped with IP65 waterproof enclouse and high quality hardware design, iLitebeam 5AC can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment

Easy to Setup and Manage

iLBE-5AC comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.

IP COM AC1200 Indoor/Outdoor Wi-Fi Access Point | IUAP-AC-M

Highlights:
The gigabit dual-band indoor/outdoor access point iUAP-AC-M offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, iUAP-AC-M provides a maximum coverage radius of 200 meters. iUAP-AC-M can be installed either on the wall or around a pole. iUAP-AC-M can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, iUAP-AC-M is designed for wireless coverage in factories, warehouses and other harsh outdoor environments.

IP65 protection

Professional materials and design guarantee iUAP-AC-M an IP65 enclosure for harsh environments both indoors and outdoors.

IEEE 802.11ac Wave2 and MU-MIMO

Powered by MU-MIMO technology, a single iUAP-AC-M can communicate with multiple wireless clients at the same time, letting you enjoy higher throughput and better experience.

Dual-band for more connected clients

iUAP-AC-M allows clients that support either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.

High-gain omni-directional antennas

Equipped with two 5 dBi high-gain omni-directional antennas, iUAP-AC-M provides a maximum coverage radius of 200 meters. iUAP-AC-M can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors.

Built-in RF for intelligent optimization

Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-M to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.

VLAN tagging for SSID

iUAP-AC-M allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.

Standard PoE sourcing and DC power supply for easy deployment

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-M.

Centralized management

The iUniFi Controller makes it easy to manage and monitor the whole iUniFi devices in a real-time manner and the cloud services enable a remote and secure access free from the restrictions of device location.

IP COM AC1350 Wave 2 Gigabit IEEE 802.11ac Ceiling Access Point | IUAP-AC-LR

Highlights:
Compliant with IEEE 802.11ac, iUAP-AC-LR is a gigabit dual-band ceiling access point, offering a concurrent data rate as high as 1317 Mbps. Powered by MU-MIMO technology, a single iUAP-AC-LR can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. The built-in omni-directional antennas optimize signal radiating directions and broaden the wireless coverage of a single AP. iUAP-AC-LR can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With ceiling installation design and sleek appearance, iUAP-AC-LR simplifies wireless networking for enterprises, hotels and other public indoor spaces.

Gigabit internet connection for ultra-fast experience

Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.

IEEE 802.11ac Wave2 and MU-MIMO

Compliant with IEEE 802.11ac Wave2 and powered by MU-MIMO technology, a single iUAP-AC-LR can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.

Dual-band for more connected clients

iUAP-AC-LR allows clients supporting either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.

Built-in omni-directional antennas

Built-in high-gain omni-directional antennas guarantee a broader and stable coverage.

Built-in RF for intelligent optimization

Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-LR to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.

VLAN tagging for SSID

iUAP-AC-LR allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.

Standard PoE sourcing and DC power supply for easy deployment

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-LR.

Centralized management

The iUniFi Controller makes it easy to manage and monitor the whole iUniFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

IP-COM AC1200, 1200Mbps 11AC Wave 2 Wi-Fi Enterprise Mesh Wi-Fi System | EW9

Highlights:

EW9 is a wireless router from IP-COM specially designed for offices, restaurants, hotels and other places. With advanced true Mesh technology and innovative built-in antennas design, enterprise users can adjust the quantities of EP9 according to the application area and combined with EW9 to form a distributed Mesh network without dead zone. EW9 supports router mode and bridge (AP) mode, which can meet the requirements of small project with Mesh network, or partial Mesh network for large projects. The device adopts full gigabit network interface design with maximum support for dual WAN. It integrates various enterprise functions such as intelligent bandwidth control, WEB authentication, SMS authentication, etc., and can be applied to a variety of application scenarios.
True Mesh
IP-COM EW9+EP9 products apply True Mesh technology, the devices can fulfill plug and play, self-discovery, self-configutation and self-networking. Free your wire, free your hands.

1200M 11AC Wave 2 Wi-Fi
Using 802.11 ac Wave 2 MU (MIMO) technology, faster your surfing experence and strongly improve the capacity.

Omni Antenna Design
IP-COM Mesh wifi products use innovative signal design, built-in antennas combine with beam forming technology, focus signal on the user’s location, greatly improved the quality of the wireless coverage.

Seamless Roaming
Mesh network supports seamless roaming, when wireless users roaming among multiple nodes, the system can maintain the user`s IP address information and keep the certification status, user roaming from node A to node B rapidly, roaming speed < 50 ms, the users can feeling nothing in the surfing experience .

APP Management
IP-COM mesh products support APP cloud management, the management and maintenance of devices can be realized through mobile APP. By using ip-com cloud account login, the APP can be managed and maintained remotely.

Smart Bandwidth Management
With the intelligent bandwidth management technology (QoS), the device will adjust the bandwidth intelligently according to the utilization rate of the bandwidth and the network application.

Captive Portal
Built-in multiple authentication management systems, authentication based on Portal, can completely solve the problem of traditional wireless password sharing by WiFi sharing software, network being rubbed, and internal network data being stolen.
One key authentication:authentication based on Portal, customizable Portal push page, users don`t need account and password to access to the Internet.
WEB Account password authentication:based on Portal authentication, the Portal push page can be customized, and users need to verify account and password to access to the Internet.
SMS authentication:based on Portal authentication, the Portal push page can be customized. Users need to enter their mobile phone number and pass the authentication before they can access the Internet.

IP-COM AC1750 Wave2 Gigabit Full-load 13.5W Access Point | W66AP

Highlights:
Compliant with IEEE 802.11ac Wave2, W66AP is a gigabit dual-band ceiling access point. Powered by 3×3 MU-MIMO technology, a single W66AP can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. W66AP offers reliable high-performance wireless solutions for indoor space with a mass of connected users, such as restaurants, conference rooms and classrooms.

3×3 MU-MIMO design

The 3×3 MU-MIMO design generates a concurrent rate of 1750 Mbps, providing a better performance.

IEEE 802.11ac Wave2

Powered by MU-MIMO technology, a single W66AP can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.

Dual-band for more connected clients

W66AP allows clients that support either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.

Gigabit internet connection for ultra-fast experience

Up to 1750 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.

Built-in RF for intelligent optimization

Featuring various anti-interference algorithms, the built-in RF enables W66AP to evenly allocate bandwidth resources for multiple users, filter interference, and optimize date rate, offering you a guaranteed signal strength and reliable wireless experience.

VLAN tagging for SSID

W66AP allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.

Standard PoE sourcing and DC power supply for easy deployment

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 12V DC power adapter to power on W66AP.The adapter is not included in the package and shall be purchased separately.

Centralized management

You are allowed to configure and manage multiple W66AP in a centralized manner through all IP-COM access controllers (AC) and enterprise routers that include AC functionality, and enjoy simple management, configuration and monitoring of all access points.

IP-COM AP255 Wall Plate Wireless Access Point | AP255

Highlights:
AP255 is designed to provide wifi for hotel rooms,villa, large apartment etc premise. Adopt of 86 Type wall mount junction box design, it can blend into existing decoration perferctly without any damage. Compliant with PoE 802.3af standard enable it to be deployed quickly. It is easy to setup, manage and monitor with IP-COM AP controller.

11n Wireless 300Mbps

AP255 adopts of 11n wireless standard and wireless rates up to 300 Mbps on the 2.4GHz frequency band.  The devices such as smart phone, laptop connect to it can enjoy smoother video streaming and faster file transmission.

86 Type wall mount junction box design

AP255 adpots of 86 Type wall mount junction box design to blend into the existing decoration.It will pose no problem to neighbourhood panels or other decorations.

Compliant with PoE 802.3af

The port on the back panel support Power over Ethernet (PoE) functionality, which allows both power and data to be carried over a single Ethernet cable to AP255.

Advanced Wireless Security

AP255 offers multi mechanism to prevent unauthenticated acces and protect data privacy .
1.64/128bit WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
2.Wireless Access Control based on the mac address of wireless adapter
3.Client Isolation and SSID isolation

VLAN Tagging For multi SSID

AP255 can be configured to broadcast up to two SSID. Each SSID can be tagged to a specified networkVLAN for di erent user access based on established access rights.

Easy to setup, Easy to manage

AP255 can be managed by AP Controller, the administrator can setup, manage and monitor all the Aps online status more easily.

IP-COM AP325 v3, 2.4Ghz 2×2 802.11n/g/b, Up to 300 Mbps data rate Wireless Indoor Coverage access point | AP325

Highlights:
IP-COM 11n series AP(include AP325 and AP340 ) are enterprise-grade, high performance 11n Wi-Fi access points. Through the 802.11n Wi-Fi technology and enhanced transmit power and receive sensitivity, it can increase the scope of coverage, improve access density and operation stability.

High performance

300Mbps wireless transfer rate, which is approximately 6 times faster than 802.11g, is ideal for scenarios like office, conference room, libraryetc.

Advanced Wi-Fi security

IP-COM AP support almost all the latest encryption and authentication mechanisms(such as WEP,WPA-PSK,802.1X,WEB Portal,Social login),make it simple for administrator to manage enterprise security and guest access.

Low-profile industrial design

With it sleek, low profile design and controllable LEDs, blends into hotel, office environments.

Lower cost of implementation

Supporting PoE standard , AP can integrates into your existing 802.3af or 802.3at power and network infrastructure.

Automatic RF optimization

Advanced RF optimization with automatic channel, power level selection,  to reduce interference. AP can recognize various channels being used and automatically switch to the best available channel to provide best experience for the users.

Dual Fat/Fit mode

When the network start small, user can acquire the AP and set it to Fat mode. As the user grows and more devices are installed, it’s recommended to add a IP-COM AC to simplify network management and centrally manage all AP. It can significantly reduces deployment and management effort by automating device provisioning, firmware upgrades and policy enforcement.

IP-COM AP340, 2.4GHz, 300Mbps, IEEE 802.11n/g/b, Wireless Access Point | AP340

Highlights:

Small and Medium-Sized Enterprise offices, Hotels, and Primary Education Classrooms etc

Hardware Specifications

Frequency Bands

2.4GHz

PHY data rates

300Mbps

Wi-Fi Standards

IEEE 802.11n/g/b

Interfaces

1 Port ความเร็ว 10/100/1000Mbps PoE/LAN port, 1*DC Power Jacket

Buttons

1*RESET

Antennas

2 x Integrated 2.4GHz Omni-directional, 3dBi gain

Max Power Consumption

13W

LED Indicators

PWR, 2.4G

Power Supply

DC Input: 51 VDC 1.25A
PoE: 802.3at compliant

Receiver Sensitivity

MCS0: -88dBm
MCS7: -72dBm

IP-COM AP355 Indoor High Capacity Ceiling and Wall Mount Access Point | AP355

Highlights:

IP-COM high-density series AP(include AP355, AP365) are enterprise-grade, high performance Gigabit Wi-Fi access points, prepared for ultra-high density environments. Through the 802.11ac Wi-Fi technology and enhanced transmit power and receive sensitivity, it can increase the scope of coverage, improve access density and operation stability.Under the management and control of the IP-COM series AC, it support advanced functions like Access Control, Load Balancing, Seamless Roaming, Multiple Authentication Modes and so on, are ideal match for Medium-Sized Enterprise offices, conference halls,, multimedia classroom WLAN Deployment.

  • With it sleek, low profile design and controllable LEDs, blends into hotel, office environments.
  • Supporting PoE standard , AP can integrates into your existing 802.3at power and network infrastructure.
  • Dual-band design deliver high-capacity and high-performance to new 802.11ac and legacy 802.11a/b/g/n clients. The 802.11ac Gigabit Wi-Fi along with Gigabit Ethernet enabling fast data forwarding without any bottleneck, is ideal for high-bandwidth applications such as streaming video, P2P download and gaming.
  • IP-COM AP support almost all the latest encryption and authentication mechanisms(such as WEP,WPA-PSK,802.1X,WEB Portal,Social login),make it simple for administrator to manage enterprise security and guest access.
  • Advanced RF optimization with automatic channel, band and power level selection, to reduce co-channel interference. AP can recognize various channels being used and automatically switch to the best available channel to provide the best experience for users.

IP-COM AP365 high-reach Up to 1750 Mbps, 2.4Ghz 802.11n/g/b and 5Ghz 802.11ac/n/a radios, indoor access point | AP365

Highlights:
IP-COM high-density series AP(include AP355, AP365) are enterprise-grade, high performance Gigabit Wi-Fi access points, prepared for ultra-high density environments. Through the 802.11ac Wi-Fi technology and enhanced transmit power and receive sensitivity, it can increase the scope of coverage, improve access density and operation stability.

Low-profile industrial design

With it sleek, low profile design and controllable LEDs, blends into hotel, office environments.

Lower cost of implementation

Supporting PoE standard , AP can integrates into your existing 802.3at power and network infrastructure.

High performance

Dual-band design deliver high-capacity and high-performance to new 802.11ac and legacy 802.11a/b/g/n clients. The 802.11ac Gigabit Wi-Fi along with Gigabit Ethernet enabling fast data forwarding without any bottleneck, is ideal for high-bandwidth applications such as streaming video, P2P download and gaming.

Advanced Wi-Fi security

IP-COM AP support almost all the latest encryption and authentication mechanisms(such as WEP,WPA-PSK,802.1X,WEB Portal,Social login),make it simple for administrator to manage enterprise security and guest access.

Automatic RF optimization

Advanced RF optimization with automatic channel, band and power level selection, to reduce co-channel interference. AP can recognize various channels being used and automatically switch to the best available channel to provide the best experience for users.

Airtime Fairness

Airtime fairness is an advanced scheduling technique that gives equal airtime to each client regardless of its theoretical data rate. This will ensure higher download speed and increases overall network capacity.

Dual Fat/Fit mode

When the network start small, user can acquire the AP and set it to Fat mode. As the user grows and more devices are installed, it’s recommended to add a IP-COM AC to simplify network management and centrally manage all AP. It can significantly reduces deployment and management effort by automating device provisioning, firmware upgrades and policy enforcement.

Original price was: UShs1,181,978.Current price is: UShs1,180,000.

IP-COM EP9 – AC1200, 1200Mbps 11AC Wave 2 Wi-Fi, Enterprise Mesh WiFi System | EP9

Highlights:

EP9 is Mesh Wi-Fi system extender from IP-COM specially designed for office, restaurant, hotel and other scenarios. With advanced true Mesh technology and innovative built-in omnidirectional antennas design, enterprise users can adjust the quantities of EP9 according to the application area and combined with EW9 to form a distributed Mesh network without dead zone. EP9 provides a variety of mounting methods by mounting brackets and accessories, it supports wall mount/ceiling mount/pole mount/desk mount, and can be applicated in a variety of scenarios.
True Mesh
IP-COM EW9+EP9 products apply True Mesh technology, the devices can fulfill plug and play, self-discovery, self-configutation and self-networking. Free your wire, free your hands.

1200M 11AC Wave 2 Wi-Fi
Using 802.11 ac Wave 2 MU (MIMO) technology, faster your surfing experence and strongly improve the capacity.

Omni Antenna Design
IP-COM Mesh wifi products use innovative signal design, built-in antennas combine with beam forming technology, focus signal on the user’s location, greatly improved the quality of the wireless coverage.

Seamless Roaming
Mesh network supports seamless roaming, when wireless users roaming among multiple nodes, the system can maintain the user`s IP address information and keep the certification status, user roaming from node A to node B rapidly, roaming speed < 50 ms, the users can feeling nothing in the surfing experience .

APP Management
IP-COM mesh products support APP cloud management, the management and maintenance of devices can be realized through mobile APP. By using ip-com cloud account login, the APP can be managed and maintained remotely.

Smart Bandwidth Management
With the intelligent bandwidth management technology (QoS), the device will adjust the bandwidth intelligently according to the utilization rate of the bandwidth and the network application.

Captive Portal
Built-in multiple authentication management systems, authentication based on Portal, can completely solve the problem of traditional wireless password sharing by WiFi sharing software, network being rubbed, and internal network data being stolen.
One key authentication:authentication based on Portal, customizable Portal push page, users don`t need account and password to access to the Internet.
WEB Account password authentication:based on Portal authentication, the Portal push page can be customized, and users need to verify account and password to access to the Internet.
SMS authentication:based on Portal authentication, the Portal push page can be customized. Users need to enter their mobile phone number and pass the authentication before they can access the Internet.

Diversity Founction Mount Bracket
Combined with easy mounting bracket and fittings, four installation modes can be realized: wall mount/ceiling mount/pole mount/desk mount.

IP-COM EW9+EP9x2 AC1200 Enterprise Mesh Wi-Fi System | EW9+EP9x2

Highlights:
AC1200 Enterprise Mesh Wi-Fi System is a wiring-free solution that is special designed for office, restaurant, hotel and other places of WLAN. It adopts new True Mesh technology,using 1167 Mbps dual band. Hardware optimization and built-in antennas optimization technology makes outstanding performance. Unique mesh technology makes a revolution to the installation of the wireless project which avoid wiring and manpower.

True Mesh

IP-COM EW9+EP9 products apply True Mesh technology, the devices can fulfill plug and play, self-discovery, self-configutation and self-networking. Free your wire, free your hands.

1200M 11AC Wave 2 Wi-Fi

Using 802.11 ac Wave 2 MU (MIMO) technology, faster your surfing experence and strongly improve the capacity.

Omni Antenna Design

IP-COM Mesh wifi products use innovative signal design, built-in antennas combine with beam forming technology, focus signal on the user’s location, greatly improved the quality of the wireless coverage.

Seamless Roaming

Mesh network supports seamless roaming, when wireless users roaming among multiple nodes, the system can maintain the user`s IP address information and keep the certification status, user roaming from node A to node B rapidly, roaming speed < 50 ms, the users can feeling nothing in the surfing experience .

APP Management

IP-COM mesh products support APP cloud management, the management and maintenance of devices can be realized through mobile APP. By using ip-com cloud account login, the APP can be managed and maintained remotely.

Smart Bandwidth Management

With the intelligent bandwidth management technology (QoS), the device will adjust the bandwidth intelligently according to the utilization rate of the bandwidth and the network application.

Dual WAN capacity

All gigabit network port design, provides 2 WANLAN turntable ports and 2 fixed LAN ports, it can flexibly match the number of network ports according to the actual network demand and meet the actual application network demand. In dual WAN network, WAN port bandwidth will be automatically superimposed and load balanced.

Captive Portal

Built-in multiple authentication management systems, authentication based on Portal, can completely solve the problem of traditional wireless password sharing by WiFi sharing software, network being rubbed, and internal network data being stolen.
One key authentication: authentication based on Portal, customizable Portal push page, users don`t need account and password to access to the Internet.
WEB Account password authentication: based on Portal authentication, the Portal push page can be customized, and users need to verify account and password to access to the Internet.
SMS authentication: based on Portal authentication, the Portal push page can be customized. Users need to enter their mobile phone number and pass the authentication before they can access the Internet.

Diversity Founction Mount Bracket

Combined with easy mounting bracket and fittings, four installation modes can be realized: wall mount/ceiling mount/pole mount/desk mount.

 

Category EW9 EP9
Hardware
Frequency Dua-Band:2.4G+5G Dual-Band:2.4G+5G
Wireless Rate 300+867Mbps 300+867Mbps
11AC Wave 2 support support
Beamforming support support
Networking Technology True Mesh True Mesh
Antenna 4*4dBi, Horizontal omnidirectional antenna 4*4dBi, Horizontal omnidirectional antenna
Interface 1*Power Port, 1*Reset button, 4*Gigabit Port 1*Power Port,1*Reset button
Software
WAN Ports dual WAN
QoS support support
Seamless Roaming support support
Installation and Deployment
Mounting wall mount/ceiling mount/pole mount/desk mount wall mount/ceiling mount/pole mount/desk mount
APP Installation and Configuration support support
Route Mode and Bridge Mode support support
Numers for Products Max:9 Max:9

IP-COM Pro-6-LR 802.11AX Dual-Band Long Range Access Point, Up to 3000 Mbps Data Rate, 2.4 GHz / 5 GHz Frequency, 2X2 MU-MIMO, 15.74 W Power, White | PRO-6-LR

Highlights:

Pro-6-LR is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single Pro-6-LR to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. Pro-6-LR is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. ProFi Controller makes it easy to manage and monitor the whole ProFi series in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

3 Gbps Wi-Fi, 2.5 times higher rate

Both the 2.4 GHz and the 5 GHz radio bands support the new Wi-Fi 6 standard and the concurrent Wi-Fi rate is as high as 3 Gbps, 2.5 times that of the last-generation of AP (AC1200).

Higher capacity

Supporting OFDMA, SR, and MU-MIMO, 802.11ax greatly improves the system capacity compared with the last generation 802.11ac. With the TWT technology, AP can uniformly schedule the wakening and sleep of clients, significantly reducing client conflicts and unnecessary wakeups, and therefore is suitable for high-density crowd scenarios where large numbers of clients are deployed.

More than 20% wider Wi-Fi coverage

With the long OFDM symbol transmission mechanism and 2 MHz narrowband transmission, the 802.11ax protocol significantly reduces packet loss rate and noise interference, and improves the receiving sensitivity of clients. In addition, Pro-6-LR adopts a high-specification RF amplifying circuit, greatly widening the Wi-Fi coverage.

 

IP-COM W63AP AC1200 Wave 2 Gigabit 2.4 GHz, 5 GHz, Access Point | W63AP

Highlights:
The IEEE 802.11ac Wave 2-compliant W63AP is a gigabit dual-band ceiling access point. It offers a concurrent data rate as high as of 1167 Mbps. Powered by MU-MIMO technology, a single W63AP can simultaneously communicate with multiple clients, greatly improving the throughput and bettering user experience. The built-in omni-directional antennas optimize signal radiating directions, broadening the wireless coverage of a single AP. W63AP can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With its ceiling installation design and sleek appearance, it simplifies wireless networking for enterprises, hotels and other public indoor spaces.

Gigabit internet connections for ultra-fast experience

Up to 1167 Mbps dual-band data rate, and the Gigabit Ethernet port offers you ultra-fast internet connections.

IEEE 802.11ac Wave 2 and MU-MIMO

Compliant with IEEE 802.11ac Wave 2 and powered by MU-MIMO technology, a single W63AP can communicate with multiple wireless clients simultaneously, leading to higher throughput.

2.4 GHz and 5 GHz bands for more connected clients

The dual-band wireless design allows clients that support 2.4 GHz and/or 5 GHz bands to connect to the AP at the same time, tripling the quantity of connected clients of traditional single-band AP.

Built-in omni-directional antennas

With the optimized built-in high-gain omni-directional antennas, W63AP outperforms in radiating wireless signals, and greatly broadens its wireless coverage.

Standard PoE sourcing and DC power supply for easy deployment

W63AP can be powered by PoE sourcing equipment that compliant with IEEE 802.3at, as well as the power adapter.

VLAN tagging for SSID

W63AP allows you to set multiple SSIDs, and the IEEE 802.11q VLAN-compliant feature enables you to add VLAN tags for SSIDs, thus protecting the security of your network.

Built-in RF optimization

W63AP supports RF optimization technology and integrates with various algorithms for interference mitigation. Features include multi-user fairness, interference filtering, speed optimization, and signal strength guarantee.

Centralized management

W63AP can be centrally managed and configured through all IP-COM access controllers (AC) and enterprise routers that includes AC functionality, relieving the burdens of network administrators for management, configuration and monitoring of all access points.

Scroll To Top
Close
Close
Shop
Filters
0 Wishlist
0 Cart
Close

My Cart

Shopping cart is empty!

Continue Shopping